Using the Printer Function
24
5
Printing with Windows
Printing with a Windows 2000/XP, Windows Server 2003 or
Windows NT 4.0 Print Server
This section describes how to configure a client computer on a network using
Windows 2000/XP, Windows Server 2003, Windows NT 4.0 Server or Windows
NT 4.0 Workstation as a print server.
When using a Windows 2000/XP, Windows Server 2003, or Windows NT 4.0
print server, select a shared printer on Windows 2000/XP, Windows Server
2003, or Windows NT 4.0.
This section describes running [Add Printer Wizard] on each client computer, and
adding the Windows 2000, Windows XP, Windows Server 2003, and Windows
NT 4.0 print servers as the network printer.
These instructions are for Windows 98.
Limitation
❒ When using a print server connected to the printer with SmartDeviceMonitor
for Client, you cannot use Recovery Printing and Parallel Printing.
❒ When using Windows XP as a print server, the client computer cannot receive
notification of print job completion.
Note
❒ This section assumes the client is already configured to communicate with a Win-
dows 2000/XP, Windows Server 2003, or Windows NT 4.0 print server. Do not be-
gin the following procedure until the client computer is set up and configured
correctly.
❒ When using Windows NT 4.0 as the print server, make sure you install the Win-
dows NT 4.0 printer driver before connecting the print server. There is a Windows
NT 4.0 printer driver on the CD-ROM labeled “Printer Drivers and Utilities”.
AJK169S
To Next Page
Loading...
