Printing with a Mac OS
29
5
Mac OS X
Note
❒ You need an administrator name and a password (phrase). For more informa-
tion, consult your administrator.
A Open [System Preferences...], and then click the Network icon.
B From the [show] pop-up menu, select [Built-in Ethernet].
C Click the [AppleTalk] tab.
D If you change zones, select a name on the [AppleTalk Zone:] pop-up menu.
E When the setting is complete, click [Apply Now].
Configuring the Printer
Use the control panel to activate the AppleTalk protocol (The default is active).
Reference
For more information about configuration, see p.11 “Interface Settings/Net-
work”.
Changing the Printer Name
If the network has several similar model printers, the names will be the same.
Printers with the same name will have slightly different names in the [Chooser]
dialog box. For example, three printers named “printer” will appear in the
[Chooser] dialog box as “printer0”, “printer1”, and “printer2”.
To change the printer name in the Mac OS EtherTalk environment, use Printer
Utility for Mac included on the CD-ROM labeled “Printer Drivers and Utilities”.
Changing the Zone
To change the zone configuration in a Mac OS EtherTalk environment, use Print-
er Utility for Mac included on the CD-ROM labeled “Printer Drivers and Utili-
ties”.
Reference
For more information about using Printer Utility for Mac, see PostScript3, pro-
vided as a PDF file on the CD-ROM labeled “Printer Drivers and Utilities”.
To Next Page
Loading...
