Using the Printer Function
30
5
Printing with NetWare
This section describes how to configure the printer for use as a print server or
remote printer in a NetWare environment.
This section assumes NetWare is functional and the necessary environment for
the NetWare print service is available.
Note
❒ NetWare must be set to active using the control panel. For more information
about how to set it, see p.5 “"Network environment" describes a situation
where the printer is connected to a computer via wireless LAN.”.
❖ SmartDeviceMonitor for Admin
To use a printer in a NetWare environment, configure the NetWare printing
environment using SmartDeviceMonitor for Admin.
Note
❒ If you configure NetWare printing using SmartDeviceMonitor for Admin
under the following environments, NetWare Client from Novell is re-
quired:
• NDS mode in Windows 95/98/Me
• NDS or Bindery mode in Windows 2000/XP, Windows Server 2003,
Windows NT 4.0
❖ Printers listed by SmartDeviceMonitor for Admin
SmartDeviceMonitor for Admin displays a list of printers that are connected
to the network.
If you cannot find the printer from the displayed list, refer to the configura-
tion page printed from the printer. For more information about printing a
configuration page, see “List/Test Print”, Printer Reference.
ACV017S
To Next Page
Loading...
