Printing with Windows
25
5
A On the [Start] menu, point to [Settings], and then click [Printers].
B Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
C Click the [Details] tab, and then click [Add Port].
D Click [Network], and then click [Browse].
E On the network tree, double-click the name of the computer used as the
print server.
The printers connected to the network are displayed.
F Click the name of the printer you want to use, and then click [OK].
G Click [OK].
H Make sure the port name is displayed in the [Print to the following port] box,
and then click [OK].
Printing without a Print Server
You can use this printer as a network printer without connecting to a print server.
You can configure the following ports:
❖ SmartDeviceMonitor
You can print via TCP/IP, IPP, or NetBEUI using SmartDeviceMonitor.
Note
❒ Install SmartDeviceMonitor for Client from the supplied CD-ROM. For
more information about installation, see Printer Reference.
❒ For more information about SmartDeviceMonitor for Client, see p.45 “Us-
ing SmartDeviceMonitor for Client”.
❖ Standard TCP/IP port
You can print via TCP/IP using a standard TCP/IP port.
Note
❒ A standard TCP/IP port can be used with Windows 2000/XP or Windows
Server 2003.
❖ LPR port
You can print via TCP/IP using an LPR port.
Note
❒ An LPR port can be used with Windows 2000/XP, Windows Server 2003,
or Windows NT 4.0.
To Next Page
Loading...
