Using SmartDeviceMonitor for Admin
50
7
❖ What can it do?
• Switch to, and come out of Energy Saver mode.
• Check information about printing, paper quantity, etc.
• Simultaneously monitor multiple printers. When there are many printers,
you can create groups and classify printers to facilitate management.
• Check the machine's network settings and detailed device information.
• Change the machine's network settings.
• Check details of print jobs sent from a computer.
• Check job histories of printed and photocopied documents identified by
user codes.
• Change and save numbers stored in the printer by computer.
• Check settings for and display the status changes of group devices.
Reference
For more information about these settings, see SmartDeviceMonitor for
Admin Help.
Limitation
❒ TCP/IP is required for the following functions:
• Using Tools
• Managing User Information
• Starting the Web Image Monitor using SmartDeviceMonitor for Ad-
min
Changing the Network Interface Module Configuration
Limitation
❒ Internet Explorer 4.01 or a later version is required to use NIB Setup Tool.
A Start SmartDeviceMonitor for Admin.
A list of machines appears.
B In the list, select the printer for which you want to change configuration.
C On the [Tools] menu, click [NIB Setup Tool].
NIB Setup Tool starts.
D Click [Property Sheet], and then click [OK].
The dialog box for entering the password appears.
E Enter the password, and then click [OK].
Note
❒ The factory default password is “password”.
To Next Page
Loading...
