53
8. Configuring the Network Interface
Module Using a Web Image Monitor
You can check the status of a printer and change its settings using the Web Image
Monitor.
❖ What can it do?
You can remotely check the status of a printer or specify its settings over the
network using a computer's Web browser.
The following functions are available with Web Image Monitor:
• Displaying printer status/settings
• Checking print job status and history, or deleting the print job
• Making printer settings
• Network protocol settings
•Security settings
❖ Configuring the printer
This requires TCP/IP to be installed. After the printer has been configured to
use TCP/IP, it will be possible to adjust settings using a Web Image Monitor.
Reference
For more information about configuring the printer to use TCP/IP, see p.5
“"Network environment" describes a situation where the printer is con-
nected to a computer via wireless LAN.”.
❖ Browser
•Windows
• Microsoft Internet Explorer 5.5 or later
• Netscape 6.2 or later
•Macintosh
• Netscape 6.2 or later
• Safari 1.0 or later
Limitation
❒ If the Web browser in use is older than the recommended version or [Java-
Script] and [Cookie] are not available, display and operation problems may
occur.
❒ If you are using a proxy server, change the Web browser settings. Consult
your network administrator about the settings.
❒ Sometimes after clicking [Back], the previous page may not appear. In this
case, click [Refresh] or [Reload].
❒ This printer information cannot be refreshed automatically. Click [Reload]
or [Refresh] on the Web browser, or click [Refresh] on the work area when
you want to refresh the printer information.
To Next Page
Loading...
