Ricoh Priport HQ9000 - Displaying Printer Status; Managing User Information

SmartDeviceMonitor for Admin
51
7
F Change the device name and comment.
G Click [OK].
Confirmation message appears.
H Click [OK].
Note
❒ For more information about changing printer names, comments, and other
items, see NIB Setup Tool Help.
Displaying Printer Status
Follow the procedure below to view the status of machines using SmartDevice-
Monitor for Admin.
A Start SmartDeviceMonitor for Admin.
A list of machines appears.
B For more information, select the desired printer in the list, and then click
[Open] on the [Device] menu.
The status of the printer is displayed in the dialog box.
Note
❒ For more information about each item in the dialog box, see SmartDevice-
Monitor for Admin Help.
Managing User Information
A Start SmartDeviceMonitor for Admin.
A list of machines appears.
B In the list, select the printer for which you want to change configuration.
C On the [Tools] menu, click [User Management Tool].
The dialog box for entering the password appears.
D Enter the password, and then click [OK].
Note
❒ The factory default password is “password”.
User Management Tool starts.
For more information about using User Management Tool, see User Manage-
ment Tool Help.