Ricoh Priport HQ9000 - Going to the Top Page

49
7. Using SmartDeviceMonitor
for Admin
SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Admin, not only can you monitor the status of
network printers, but you can also change the configuration of the network in-
terface module using the TCP/IP or IPX/SPX protocol.
❖ Protocol Stack
*1
IPX is used for monitoring the machines.
Operating system Protocol stack
Microsoft Windows 95/98/Me TCP/IP provided with Windows 95/98/Me
IPX
*1
/SPX provided with Windows 95/98/Me
NetWare network client provided with Windows
95/98/Me
Novell Client for Windows 95/98/Me
Microsoft Windows 2000 TCP/IP provided with Windows 2000
IPX
*1
/SPX provided with Windows 2000
NetWare Client provided with Windows 2000
Novell Client for Windows NT/2000/XP
Microsoft Windows XP TCP/IP provided with Windows XP
IPX
*1
/SPX provided with Windows XP
Novell Client for Windows NT/2000/XP
Microsoft Windows Server 2003 TCP/IP provided with Windows Server 2003
IPX
*1
/SPX provided with Windows Server 2003
Novell Client for Windows NT/2000/XP
Microsoft Windows NT 4.0 TCP/IP provided with Windows NT 4.0
IPX
*1
/SPX provided with Windows NT 4.0
Client Service for NetWare provided with Windows NT 4.0
Novell Client for Windows NT/2000/XP