Setting Up the Machine on a Network
10
3
Configuring the network using other utilities
In addition to the control panel, a Web Image Monitor and SmartDeviceMonitor
for Admin can also be used for configuring the network.
The following table shows available settings:
Note
❒❍ Indicates printer settings can be changed.
❒ - Indicates the setting cannot be changed from that device.
*1
You can make the TCP/IP settings if SmartDeviceMonitor for Admin is communi-
cating with the printer using IPX/SPX.
*2
You can make the IPX/SPX settings if SmartDeviceMonitor for Admin is communi-
cating with the printer using TCP/IP.
Name on the control panel
Web Im-
age Mon-
itor
SmartDe-
viceMon-
itor for
Admin
telnet
Interface Network DHCP ❍❍❍
IP Address ❍❍❍
Subnet Mask ❍❍❍
Gateway Address ❍❍❍
NW
Frame
Type
Auto ❍ - ❍
EthernetII ❍ - ❍
Ethernet802.2 ❍ - ❍
Ethernet802.3 ❍ - ❍
EthernetSNAP ❍ - ❍
Active
Protocol
TCP/IP -
❍
*1
❍
NetWare ❍
❍
*2
❍
SMB ❍❍❍
AppleTalk ❍❍❍
Ethernet Speed - - -
LAN
Type
Ethernet ❍ - ❍
IEEE 802.11b ❍ - ❍
IEEE
802.11b
Comm. Mode ❍ - ❍
Channel ❍ - ❍
Trans. Speed - - ❍
SSID ❍ - ❍
WEP Encryption ❍ - ❍
WEP Key ❍ - ❍
To Next Page
Loading...
