Printing with NetWare
41
5
M Create a print server as follows:
A Select the context specified using NIB Setup Tool (Step
G
-B), and on the
[Object] menu, click [Create].
B In the [Class of new object] list, click [Print Server], and then click [OK].
If you are using NetWare 5/5.1, 6, click [Print Server (Non NDPS)].
C In the [Print Server name] box, enter the name of the print server.
Important
❒ Use the same name as that specified using NIB Setup Tool (step
G
-B).
D Select the [Define additional properties] check box, and then click [Create].
N Assign the printer to the created print server as follows:
A Click [Assignments], and then click [Add] in the [Assignments] area.
B In the [Available objects] box, click the queue created in step
J
, and then
click [OK].
C In the [Printers] box, click the printer assigned in step B, and then click
[Printer Number].
D Enter the printer number, and then click [OK].
Important
❒ Use the same number as that specified as Remote Printer No. using NIB
Setup Tool (step
G
-G).
E After checking the settings, click [OK].
O Start the print server by entering the following from the NetWare server's
keyboard.
If it is running, restart after quitting.
❖ To quit
CAREE: unload pserver
❖ To start
CAREE: load pserverprint_server_name
To Next Page
Loading...
