Message List
115
9
Print queue <print queue name> cannot be
serviced by printer 0, <print server name>
(In print server mode) The print queue name
cannot be serviced. Make sure that print
queue volume is on the specified file server.
Print server
<print server
name> has
no printer.
(I
n
pr
i
nt
s
e
rv
e
r m
o
de
)
T
he
p
ri
n
t
er
i
s n
o
t
as
-
signed to the
print server <pr
int server
name>. Using NWadmin, assign the printer,
and then restart the printer device.
Print sessions full Cannot accept the print session.
Printer <printer name> has no queue. (In print server mode) The print queue is not
assigned to the printer. Using NWadmin, as-
sign the print queue to the printer, and then
restart it.
pserver start. (NetWare) (In print server mode) NetWare service has
started.
Required computer name (<Computer name>)
is duplicated name.
The same computer name is detected on the
network. The start job determines the compu-
ter name by adding it to the suffix (0,1....).
Configure a new computer name that is
unique.
Required file server (<file server name>) not
found.
Cannot find the required file server.
restarted. LPD has started.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
The SAP function has started. The SAP (SAP
type and SAP name) packet is issued to adver-
tise the service on the NetWare server SAP ta-
ble.
session<community name> not defined. The requested community name is not de-
fined.
session_ipx<community name> not defined. The requested community name is not de-
fined.
Set context to <NDS context name> A <NDS context name> has been set.
shutdown signal received. network service re-
booting...
Rebooting the network service.
smbd start. (NetBEUI) An smbd (SMB (Server Message Block) serv-
ice) has started.
Snmp over ip is ready. Communication over TCP/IP via SNMP is
available.
Snmp over ipx is ready. Communication over IPX via SNMP is availa-
ble.
snmpd start. SNMP service has started.
started. Direct print service has started.
Message Causes and solutions
To Next Page
Loading...
