Ricoh Pro C5200s Operating Instructions

• Adjusting this setting may cause distorted text and blurred lines. Check the printed images while
making the adjustment.
0205: [Density Difference: Across Feed]
Adjust the image density difference between the top and bottom of the image.
To make the adjusted settings take effect, turn the main power off and then back on.
Press [+] to increase the density at the bottom (and decrease it at the top) and press [−] to decrease the
density at the bottom (and increase it at the top).
BZS204
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
[Black] 0 10 -10 1 None
[Cyan]
[Magenta]
[Yellow]
• Depending on the machine's other settings, this setting may have no effect.
0207: [Fusing Temperature on Standby]
Adjust the set fusing temperature according to the machine status.
To achieve proper fusing when printing, the machine adjusts the temperature of the heating roller
according to the paper type or thickness. You can reduce the wait time during which the machine makes
this adjustment by changing the temperature in effect during standby.
Setting Values
35

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes