Ricoh Pro L5160 - Performing the Connection Method for the Print Heads Automatically

Performing the Connection Method for the Print Heads Automatically
Performs image processing automatically in the connection parts between each head. Performing the
connection method for the print heads can reduce image quality defects if the defects appear in the
connection parts between each head.
1. Press the [Standard Procedure] key.
DWU103
2.
Press [Selected Setting for Head Alignment].
3. Press [Print Head Alignment].
4. Press [Auto].
5. Press [Execute].
The test pattern of the print head alignment is printed, and then the connection method for the print
heads is performed.
6. Press [Confirm].
7. Press [Print Head Alignment].
8. Press [On].
9. Press [Close] twice.
10. Press [End].
3. Convenient Usage
108