Reset
Return the set values to the factory-set values. For details, see page 153 "Initializing Setting Items".
[Maintenance] Screen
This section explains the setting items and default values on the [Maintenance] screen.
Nozzle Cleaning
Select and execute the type of head cleaning that you want to perform.
Nozzle Cleaning: Low
Select a print head to be cleaned. You can simultaneously select multiple print heads from Head 1
to Head 3.
• Head 1
• Head 2
• Head 3
• Clean All Print Heads
Nozzle Cleaning: High
Select a print head to be cleaned, and then perform a more powerful type of cleaning than Nozzle
Cleaning: Low. You can simultaneously select multiple print heads from Head 1 to Head 3.
• Head 1
• Head 2
• Head 3
• Clean All Print Heads
Print Test
Print a nozzle check pattern and check whether there are discharge defects such as nozzle clogging
(blurring or drop-out of printing).
Head Cleaning Maintenance
Move the carriage to a selected position when performing machine maintenance.
• Wiping Position
• Left Side Edge Position
List of Setting Items
143
To Next Page
Loading...
