Ricoh Pro L5160 - Adjusting the Media Feed Quantity Automatically; Adjusting the Media Feed Quantity Manually

• The machine cannot adjust the media feed quantity automatically for transparent or colored media.
Adjust the media feed quantity manually. For details, see page 92 "Adjusting the Media Feed
Quantity Manually".
Adjusting the Media Feed Quantity Automatically
The machine prints the test pattern of the media feed adjustment, and then adjusts the media feed
quantity automatically.
1. Press the [Standard Procedure] key.
DWU103
2. Press [Media Feed Adjustment].
3. Press [Auto].
4. Select a print mode from [6 Pass] or [8 Pass / 12 Pass / 16 Pass / 32 Pass].
If using the machine with white ink, select a print mode from [6 Pass], [8 Pass / 12 Pass / 16 Pass],
or [32 Pass / 12 Pass (White)].
5. Press [Execute].
The test pattern of the media feed adjustment is printed, and then the media feed quantity
adjustment is performed.
6. Press [Confirm].
7. Press [End].
Adjusting the Media Feed Quantity Manually
You can print the test pattern of the media feed adjustment, and then adjust the media feed quantity
manually.
• If the control panel is not used for 30 minutes, the adjustment value entry menu is canceled and the
Home screen returns. If this happens, carry out the adjustment procedure again from the beginning.
2. Basic Operations
92