Changing the Machine Settings
This section explains the settings for items displayed on the control panel and the buzzer sound.
Registering the Remaining Amount of Media
When you enable [Display Remaining Media], you can check the remaining amount of roll media on
the home screen or the [Check Status] screen. For details about how to use the [Check Status] screen,
see page 166 "Checking Machine Status and Settings".
Register the remaining amount of roll media after replacing it.
1. Press the [User Tools] key.
2. Press [Media Display Settings].
3. Press [Display Remaining Media].
4. Press [On].
5. Press [Remaining Media].
6. Enter the remaining amount of roll media using the number keys, and then press [Set].
7. Press [Close].
8. Press [End].
Changing the Machine Settings
131
To Next Page
Loading...
