• Level 1 (Lo)
• Level 2
• Level 3 (Hi)
Default: [Level 1 (Lo)]
Cleaning (White) Interval
Set the cleaning frequency to prevent white ink from clogging.
• Level 1 (Lo)
• Level 2
• Level 3 (Hi)
Default: [Level 1 (Lo)]
Ink Circulation Interval
Set the circulation frequency to avoid white ink from settling in the ink supply route.
• Level 1 (Lo)
• Level 2
• Level 3 (Hi)
Default: [Level 3 (Hi)]
Special Maintenance
Configure the settings for special maintenance relating to white ink and cleaning print heads.
Air Purge
When nozzle defects and ink mixes are not resolved, or after replacing the displacement liquid
with white ink, select a print head and execute air purging.
• Head 1
• Head 2
• Head 3
Waste Ink Line Maintenance
Clean the waste ink line with the flushing liquid to prevent ink from clogging.
Nozzle Maintenance
Immerse print heads in caps filled with cleaning liquid for a specified period, and then clean them.
Perform this function when nozzle clogging is not resolved after head cleaning is performed.
Nozzle Immersion Time
Specify the immersion time to immerse the print heads during nozzle maintenance.
Default: [10 minute(s)]
List of Setting Items
145
To Next Page
Loading...
