Default: [140°F]
When you select the [On] check box, the temperature can be set from 68 to 158°F, using [ ] or
[ ].
Print
Specify whether to enable the print heater. When selecting the [On] check box, the heater is
enabled and the image quality can be improved.
Default: [Disable]
(mainly Europe and Asia)
Default: [55°C]
When you select the [On] check box, the temperature can be set from 20 to 70°C, using [ ] or
[ ].
(mainly North America)
Default: [131°F]
When you select the [On] check box, the temperature can be set from 68 to 158°F, using [ ] or
[ ].
Post
Specify whether to enable the post-heater. When selecting the [On] check box, the heater is
enabled and ink can be cured after printing.
Default: [Disable]
(mainly Europe and Asia)
Default: [70°C]
When you select the [On] check box, the temperature can be set from 20 to 95°C, using [ ] or
[ ].
(mainly North America)
Default: [158°F]
When you select the [On] check box, the temperature can be set from 68 to 203°F, using [ ] or
[ ].
All On/All Off
Specify whether to enable the pre-heater, print heater, post-heater, and cure heater at one time.
• All On
• All Off
If you press [All On] or [All Off], you can select the check boxes for the pre-heater, print heater,
and post-heater simultaneously.
(mainly Europe and Asia)
4. Configuring and Managing the Machine
150
To Next Page
Loading...
