Supported media:
For details, see page 42 "Supported Media".
Maximum print area:
For details, see page 42 "Supported Media".
Distance accuracy:
• Absolute accuracy
±0.3 mm or ±0.3% of the specified distance, whichever is larger.
• Reproducibility
±0.2 mm or ±0.1% of the specified distance, whichever is larger.
Perpendicularity:
±0.5 mm/500 mm
Media skew:
• Roll media
5 mm or less/10 m
• Leaf media
15 mm or less/10 m
Print head height adjustment:
Default/+1/+2/+3
Media cut:
Auto/manual (only for the horizontal direction)
Media output method:
Automatically rolling up media with the roll-up unit (the rolling up face can be switched to either
inner winding of the print side or outer winding of the print side.)
Waste ink bottle:
1,600 cc
Supported interface:
Ethernet (1000BASE-T, 100BASE-TX) × 1
Network protocol:
TCP/IP (IPv4, IPv6), DNS, HTTP, Bonjour, SNMPv1, SNMPv2
Supported operating system
*2
:
According to ONYX specifications
Printer command:
RPCS raster
Specifications
249
To Next Page
Loading...
