• Dust included in the packaging of roll media may have accumulated in the side of the roll. If the roll
media is used in this state, it may cause nozzle clogging, etc. Remove dust affixed in the side of the
roll before setting the media.
• Do not use a roll core with dents or media that is warped. The media may float, leading to
interference with the carriage, and affecting the overall print quality.
• Do not place the printed media surfaces face-to-face. Doing so may produce uneven luster and
cause the printed image to come off.
• For details about handling and for notes on the media, see the manual supplied with the media or
ask the manufacturer.
About Media
47
To Next Page
Loading...
