To Next Page
F
fwilliamsSep 1, 2025
What to do if the cassette is not loaded correctly in Ricoh Ri 100 Printer?
- LLuke NortonSep 1, 2025
Detach the cassette, and then load it again.
What to do if the cassette is not loaded correctly in Ricoh Ri 100 Printer?
Detach the cassette, and then load it again.
What to do if my Ricoh Ri 100 shows 'SCXXX-XX Power Off On'?
If your Ricoh Printer displays 'SCXXX-XX Power Off On / Call Service if error reoccurs', it means an error has occurred. Turn the machine off and then on. If the message reappears, contact your sales or service representative.
What to do if the right front cover is open on my Ricoh Printer?
Close the right front cover.
What does 'Hardware Problem Ethernet Board' mean on Ricoh Ri 100 Printer?
If your Ricoh Printer displays 'Hardware Problem Ethernet Board', it means an error in the Ethernet port (Ethernet board) network function has occurred. Disconnect all cables, turn the machine off, and then turn it on again. If the message reappears, contact your sales or service representative.
Why does my Ricoh Ri 100 Printer say 'Cannot use High Temp'?
If your Ricoh Printer displays 'Cannot use High Temp. / Power Off On Cannot use Low Temp. / Power Off On', it means the temperature is abnormally high or low. Check the installation area and relocate the machine. Alternatively, wait until the machine acclimates to the room temperature.
What to do if Ricoh Ri 100 Printer says 'Set Tray'?
If your Ricoh Printer displays 'Set Tray', it means the tray is not loaded. Load the tray on the tray stand.
What to do if the print head nozzles might become clogged on Ricoh Printer?
Print and check a nozzle check test pattern, and then perform a head cleaning or a head flushing.
What to do if I see an error on my Ricoh Printer?
Turn the machine off and then on. If the message reappears, contact your sales or service representative.
What to do if head cleaning or flushing failed on Ricoh Ri 100 Printer?
Run the maintenance again after clearing the error. You can clear a maintenance error when the machine receives another print job or the [#Enter] key is pressed.
What to do if the ink has run out in my Ricoh Ri 100?
Install a new ink cartridge for the color indicated.
General| Print Technology | Inkjet |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Ink Type | Pigment ink |
| Power Requirements | AC 100-240V, 50/60Hz |
| Printable Area | 8.3 x 11.7 inches |
| Connectivity | USB |
| Supported Media | Cotton |
| Weight | 55 lbs |
Explains control panel functions and procedures for powering the machine on/off.
Outlines the steps for installing and setting up the machine.
Details environment, computer, unpacking, and initial setup requirements.
Guides USB connection and software setup, including driver installation.
Guides network connection and software setup via Ethernet or Wireless LAN.
Covers software overview, installation, image prep, and the printing process.
Details printing, removing T-shirts, fixing ink, and washing procedures.
Explains driver settings for accessories and basic printing procedures.
