To Next Page
P
Patrick MartinAug 30, 2025
What to do if the right front cover is open on my Ricoh Printer?
- JJordan ButlerAug 30, 2025
Close the right front cover.
What to do if the right front cover is open on my Ricoh Printer?
Close the right front cover.
How to fix high or low temperature error on Ricoh Printer?
Check the installation area and relocate the machine. Alternatively, wait until the machine acclimates to the room temperature.
What to do if the ink cartridges are not installed correctly in Ricoh Printer?
Install the ink cartridge for this machine correctly.
What to do if nozzle problems occur on Ricoh Ri 100 Printer?
Perform a head cleaning for the clogged print head.
What to do if the print head nozzles might become clogged on Ricoh Printer?
Print and check a nozzle check test pattern, and then perform a head cleaning or a head flushing.
What to do if I see an error on my Ricoh Printer?
Turn the machine off and then on. If the message reappears, contact your sales or service representative.
What to do if head cleaning or flushing failed on Ricoh Ri 100 Printer?
Run the maintenance again after clearing the error. You can clear a maintenance error when the machine receives another print job or the [#Enter] key is pressed.
What to do if the ink has run out in my Ricoh Ri 100?
Install a new ink cartridge for the color indicated.
What to do if regular maintenance is needed for Ricoh Ri 100?
You should clean both the Maintenance Unit and the print head nozzles.
General| Print Technology | Inkjet |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Ink Type | Pigment ink |
| Power Requirements | AC 100-240V, 50/60Hz |
| Printable Area | 8.3 x 11.7 inches |
| Connectivity | USB |
| Supported Media | Cotton |
| Weight | 55 lbs |
Explains control panel functions and procedures for powering the machine on/off.
Outlines the steps for installing and setting up the machine.
Details environment, computer, unpacking, and initial setup requirements.
Guides USB connection and software setup, including driver installation.
Guides network connection and software setup via Ethernet or Wireless LAN.
Covers software overview, installation, image prep, and the printing process.
Details printing, removing T-shirts, fixing ink, and washing procedures.
Explains driver settings for accessories and basic printing procedures.
