• absorbent
• dry and conducive to static buildup
• already printed on (such as the back of pre-printed paper)
• pre-printed (unless specified)
• heat sensitive/non-carbon
• too thick or thin
• pre-stitched
• glued or tacked
• stapled or clipped together
• dark in places
• irregular in length and proportion
• Even if compatible paper types are used, print quality may be lower than usual or paper jams may
occur if the paper was improperly stored.
Printable area
Printable and unprintable areas
a. Output Direction
b. Printable Area
c. Windows: 3 mm (0.12 inches), Mac: 4.2 mm (0.17 inches)
When printing on envelopes, the following print area limitations are applied.
2. Preparing for Printing
98
To Next Page
Loading...
Need help?
General