Connecting the Computer and Installing the
Software (Network Connection)
After setting up the hardware and making a test print, connect the machine to your computer. This
section explains how to connect the machine to a computer via Ethernet or a wireless LAN and how to
use "Quick Install for Network".
• For details about the connection method, see page 50 "Confirming the Connection Method".
• For details about installing the printer driver only, see page 74 "Installing the Printer Drivers for a
Network Connection".
• For details about test print, see page 128 "Using the [List/Test Print] Menu".
Before Installing the Software
Connect the machine and computer via Ethernet or wireless LAN. Then, specify the machine's network
settings according to the network environment.
• Ethernet and wireless LAN cannot be used simultaneously.
Connecting the machine via ethernet interface
Be sure to install all necessary network equipment, such as hubs, etc. before connecting the Ethernet
cable to the machine.
You can connect a 10BASE-T or 100BASE-TX cable to the machine.
• Ethernet cables are not supplied with this machine. Select your cable according to the network
environment.
Connecting the Computer and Installing the Software (Network Connection)
55
To Next Page
Loading...
Need help?
General