8. Press the [ ] or [ /Menu] key to select a resolution from Step 5, and then press the
[#Enter] key.
Adjustment:
High Speed
9. Select the items that you need to adjust, and then press the [# Enter] key.
Adjustment:
1.A
10. Enter the optimal adjustment values from Step 6, and then press the [#Enter] key.
A:
(-4, +4) 0
11. Press the [Escape] key.
Adj.Paper Feed
If horizontal lines are printed unaligned, print images are patchy, or black or white streaks are printed at
regular intervals, print a test pattern, and then adjust the paper feed setting.
1. Press the [ /Menu] key.
2. Press the [ ] or [ /Menu] key to display [Maintenance], and then press the [#Enter] key.
Menu:
Maintenance
3. Press the [ ] or [ /Menu] key to display [Adj.Paper Feed], and then press the [#Enter]
key.
Maintenance:
Adj.Paper Feed
4. Press the [ ] or [ /Menu] key to display [Pr.Test Pattern], and then press the [#Enter]
key.
Adj.Paper Feed:
Pr.Test Pattern
A test pattern to adjust paper feed is printed.
5. Check the optimal adjustment values on the printed test pattern.
The procedure is explained using the SG 2100N/SG 3110DN/SG 3110DNw as an example.
The optimal adjustment value is the number that appears on the left of the lightest gray square with
straight horizontal lines on both sides. When this number is "+2", the optimal adjustment value is
"+2".
4. Machine Setup Menus
138
To Next Page
Loading...
Need help?
General