b. 10 cm (4.0 inches)
c. 70 cm (27.6 inches)
d. 3 cm (1.2 inches)
e. 35 cm (13.8 inches)
*
A clearance of 38 cm (15.0 inches) is necessary if the multi bypass tray is attached.
Checking the power source
• Do not use any power sources other than those that match the specifications shown. Doing so
could result in fire or electric shock.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.
• Do not use extension cords. Doing so could result in fire or electric shock.
• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords
that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.
• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric
shock.
Checking the Computer and Installation Area
39
To Next Page
Loading...
Need help?
General