Notice
Important
In no event will the company be liable for direct, indirect, special, incidental, or consequential damages
as a result of handling or operating the machine.
For good output quality, the manufacturer recommends that you use genuine ink from the manufacturer.
The manufacturer shall not be responsible for any damage or expense that might result from the use of
parts other than genuine parts from the manufacturer with your office products.
User's Notes
• High temperatures inside the machine can cause a breakdown. Do not lean anything against the
vent or block it in any way.
• Warm air from the vent is normal and not a cause for concern.
• Do not leave the top or right front cover open. If you do, dust or other matter might get inside the
machine, and this will reduce print quality.
• During printing, do not move the machine or open its covers.
• Do not open the top or right front cover during printing. If you do, printing will stop.
• During printing, do not pull out a tray. Printing will stop and the paper will jam.
• Do not touch the feed belt, ink tubes, paper pressing board, or toothed rubber belt. Also, take care
not to catch cables or ink tubes with your sleeves.
11
To Next Page
Loading...
Need help?
General