Using the [PCL Menu]
You can set conditions when using PCL for printing.
Orientation
You can select the page orientation.
• Portrait
• Landscape
Default: [Portrait]
Form Lines
You can specify the number of lines per page between 5 and 128.
(mainly Europe and Asia)
Default: [64]
(mainly North America)
Default: [60]
Font Source
You can set the location of the default font.
• Resident
• RAM
Default: [Resident]
When you select [RAM], you can select only fonts downloaded to the printer RAM.
Font Number
You can specify the ID of the default font you want to use.
• 0 to 63 (internal)
• 1 to n (download)
The value of "n" is the number of fonts downloaded to the printer RAM.
Point Size
You can specify the point size you want to use for the default font between 4 and 999.75 in 0.25
increments.
Default: [12.00 points]
This setting is effective only for a variable-space font.
Font Pitch
You can specify the number of characters per inch you want to use for the default font between
0.44 and 99.99 in 0.01 increments.
Default: [10.00 pitch]
4. Machine Setup Menus
154
To Next Page
Loading...
Need help?
General