Unit of Measure
You can switch the measurement between "mm" and "inch".
(mainly Europe and Asia)
Default: [mm]
(mainly North America)
Default: [inch]
Page Size
You can select the default paper size.
(mainly Europe and Asia)
Default: [A4 (210 × 297)]
(mainly North America)
Default: [8
1
/
2
× 11]
Paper Type
You can select the default paper type.
Default: [Plain Paper]
Preprinted Ppr
You can enable this to print on pre-printed or pre-punched paper.
Default: [Off]
Copies
Specify the number of pages to print.
This setting is disabled if the number of pages to print is specified by the printer driver.
Default: [1]
Duplex
Select whether or not to print on both sides of a sheet. If you specify duplex printing, you must also
specify the binding method.
Default: [Off]
Blank Pg. Print
Specify whether or not to print blank pages.
Default: [On]
Tray Switching
You can set to switch the paper tray.
Default: [Off]
4. Machine Setup Menus
146
To Next Page
Loading...
Need help?
General