(Device) Port Number], [WSD (Printer)], [WSD (Printer) Port Number], [WSD (Printer) /
IPP Timeout], and [LLTD].
• [DHCPv6] page
You can specify [DHCPv6 Operation Mode], [IAID], and [Request Timeout].
• [DDNS] page
You can specify [IPv4], [IPv6], [A Record Registration for DHCP], [AAAA Record Registration
for DHCPv6], [Operation when records are duplicated], and [Interval to Update Device's
Record].
• [SNMP] page
• [Protocol]
You can specify whether to enable or disable IPv4 and IPv6 when using [SNMP(161)].
• [SNMPv1,v2 Setting]
You can specify [SNMPv1,v2 Function], [SNMPv1 Trap Communication], and
[SNMPv2 Trap Communication].
• [Community]
You can configure up to four SNMP communities.
• [SNMPv3] page
• [SNMPv3 Setting]
You can specify [SNMPv3 Function], [SNMPv3 Trap Communication], and [Permit
SNMPv3 Communication].
• [Permit SNMPv3 Communication]
You can configure up to five SNMPv3 trap destinations.
• [Account(User)]
You can specify [Account Name(User)], [Authentication Password(User)],
[Authentication Password re-enter(User)], [Encryption Password(User)], [Encryption
Password re-enter(User)], and [Access Type(User)].
• [Account(Administrator)]
You can specify [Account Name(Administrator)], [Authentication
Password(Administrator)], [Authentication Password re-enter(Administrator)], [Encryption
Password(Administrator)], [Encryption Password re-enter(Administrator)], and [Access
Type(Administrator)].
• [Bonjour] page
You can specify whether to enable or disable IPv4 and IPv6 when using [Bonjour].
• [Details]
You can specify [Computer Name] and [Location].
• [Print Order Priority]
Using Web Image Monitor
167