1
Notes for Wireless LAN Users
This manual explains how to connect the machine to the network via a wireless LAN interface.
Ad hoc mode is not supported.
Ethernet and wireless LAN settings cannot be enabled at the same time.
Checking Your Wireless Network Environment
Before configuring the wireless LAN settings, configure the machine's IP address.
For details about configuring the machine's IP address, see "2. Preparing for Printing", User
Guide .
Check that the access point is operating.
CHV600
Plug the wireless LAN cable into the Ethernet port before configuring the wireless LAN set-
tings.
CHV601
•
•
•
•
•