Ridder RW800 - Application

RW800 series
• RW800: 16-tooth 5/8”x3/8” zinc-plated sprockets for chain couplings
are installed.
The switching range of the limit-switch system is 120 revoluons of the drive
sha.
RW70/140
• RW70/140: 16-tooth 1⁄2”x5⁄16” zinc-plated sprockets for chain
couplings are installed.
The switching range of the limit-switch system is 860 revoluons of the drive
sha.
3.3 Applicaon
• The RW45 motor gearboxes are drive units to operate venlaon systems and screen systems in
greenhouses and livestock houses or crop-storage buildings.
• The RW45L\RW240/400L motor gearboxes with drums (belt or cable) are drive units to hoist
feeding lines and drinking lines and to open air inlets in livestock houses or crop-storage
buildings.
• The RW45TRA\RW240TRA motor gearboxes with a TRA520 rack drive are drive units to operate
venlaon systems and hoisng systems in greenhouses and livestock houses or crop-storage
buildings.
• The RW45D\RW400/600D motor gearboxes are drive units to operate venlaon systems and
hoisng systems in greenhouses and livestock houses or crop-storage buildings.
• The RW240–600\RW800 motor gearboxes are drive units to operate venlaon systems, screen
systems and hoisng systems in greenhouses and livestock houses or crop-storage buildings.
Make sure that (with RW motor gearboxes) operated systems comply
with the provisions of the applicable safety standards and safety
guidelines.
This prevents (for example) the risk:
• To become caught in a system that moves
• That loads or system parts that fall can hit persons.
Ridder Drive Systems B.V.
T +31 (0)341 416 854 - F +31 (0)341 416 611 - I ridder.com
10