Ridder RW800 - Safety, Precautions and Symbols; Signal Words, Instructions and Warnings

2. SAFETY, PRECAUTIONS AND SYMBOLS
2.1 Signal words, instrucons and warnings
Signal words (ISO 3864-2)
This product manual contains safety instrucons with dierent signal words. The list that follows
gives the risk levels and possible eects of each signal word.
Instrucons and warnings on the product
Read the product manual to fully know all product
properes, before it is used or work starts!
Ê
Ê
Ê
COVERS
It is not permied to use high-pressure cleaners (and
related cleaning agents)! Use a so brush with a small
quanty of water without cleaning agents.
Warning - Electrical voltage
Aer installaon interchange the plug in the highest
posion with the vent plug! Refer to the permied
mounng posions in the product manual.*
* Not applicable to motor gearboxes lled with grease!
Suggeson to perform an operaon more eecvely.
May result in damage or problems if an acon is performed
incorrectly.
May result in minor injury if the hazard is not avoided.
Signicant injury, possible death, if the hazard is not avoided.
Severe injury and possible death if the hazard is not avoided.
Ridder Drive Systems B.V.
T +31 (0)341 416 854 - F +31 (0)341 416 611 - I ridder.com
4