General Inspection
Please inspect your new DP1116A according to the following steps:
1． Inspect the shipping container for damage
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the instrument has
passed both electrical and mechanical tests.
The consigner or carrier shall be liable for the damage to instrument resulting
from shipment. RIGOL would not be responsible for free maintenance/rework
or replacement of the unit.
2． Inspect the instrument
In case of any damage, or defect, or failure, notify your RIGOL Sales
Representative.
3． Check the accessories
The accessories supplied with the instrument are listed in “Appendix A:
Accessories”. If your contents are incomplete or damaged, please notify your
RIGOL Sales Representative.
To Next Page
Loading...
