Safety Notices
General Considerations
Please review the following safety precautions carefully before putting your
instrument into operation so as to avoid any personal injuries or damages to the
instrument and any product connected to it. To prevent potential hazards, please use
the instrument in compliance with regulations of this manual.
Use Proper Power Cord
Only the power cord designed for the instrument and authorized by local country
could be used.
Ground the Instrument
The instrument is grounded through the Protective Earth lead of the power cord. To
avoid electric shock, it is essential to connect the earth terminal of the power cord to
the Protective Earth terminal before any inputs or outputs.
Connect Test Leads Correctly
The test leads must be connected in strict accordance with regulations in this guide.
Observe all Terminal Ratings
To avoid fire or shock hazard, observe all ratings and markers on the instrument and
check your manual for more information about ratings before connecting.
Use Proper Overvoltage Protection
Make sure that no overvoltage (such as those caused by a thunderstorm) can reach
the product, or else the operator might expose to danger of electrical shock.
Do Not Operate Without Covers
Do not operate the instrument with covers or panels removed.
Use Proper Fuse
Please use the specified fuses.
Avoid Circuit or Wire Exposure
To Next Page
Loading...
