Rigol DP1116A - DP1116 A Overview

RIGOL
User’s Guide for DP1116A
VI
DP1116A Overview
RIGOL DP1116A is a single channel Programmable DC Power Supply with up to
160W power and two scales output. The excellent performance provided by this unit
ensures a more pure and stable output from itself. Besides, the friendly, clear user
interface and a variety of configuration interfaces as well as plenty of standard
interfaces bring you more conveniences in actual use.
Main Features:
 4.3 inch, 16 M true color TFT LCD.
 Single voltage/current output in two scales: 16 V/10 A or 32 V/5 A.
 Low ripples noise: < 350 μVrms/3 mVpp.
 Excellent line regulation rate: < 0.01% + 2 mV (voltage), < 0.01% + 250 μA
(current).
 Excellent load regulation rate: < 0.01% + 2 mV (voltage), < 0.005% + 250 μA
(current).
 Overvoltage/Overcurrent protection functions, which can effectively guarantee
the load connected to the instrument by specifying proper overvoltage and or
overcurrent parameters.
 Two-level overtemperature protection function.
 Store and recall system setups.
 Timing output function, which can support up to 100 groups of timing settings
and infinite or specified number of cycles output.
 Waveform display function, which can display the output voltage, current and
power waveforms in real time so that the output status of the instrument
become clear for users in co-operation with the digital parameters shown near
the waveforms.
 Classic display mode: dial plates, classical pointer, clear variation tendency of the
voltage, current and power.
 Standard interfaces: USB Device, USB Host, LAN and GPIB (IEEE-488).
 Support USB flash device storage.
 Support remote control via Web.
 Support remote control via SCPI commands.
 Conform to LXI-C class instrument standards (version 1.2).
 Support the built-in help.
 Support panel lock.
 Support Chinese & English interfaces and input.