Command Control
The DP1116A Programmable DC Power Supply provides two ways for command
control.
User-defined Programming
Users can control the DP1116A according to SCPI (Standard Commands for
Programmable Instruments). For more details about the programming, please refer
to the Programming Guide of this product.
Using PC software from RIGOL or other manufactories
Beside the software “Ultra Sigma” provided by RIGOL, you can also use the
“Measurement & Automation Explorer” from NI (National Instruments Corporation)
company or the “Agilent IO Libraries Suite” from Agilent (Agilent Technologies, Inc.)
to control your DP1116A via remote interfaces by sending commands.
The DP1116A supports communications with a PC through USB, LAN or GPIB bus. In
the following part, we will introduce you how to use the associated Ultra Sigma
software to control the DP1116A through various interfaces. To get the Ultra Sigma
software and the detailed operations please contact RIGOL technical support or
your local sales office.
To Next Page
Loading...
