Overvoltage/Overcurrent Protection
In order to keep the power output from exceeding the load rating and avoid damages
to the load, the DP1116A was designed with the Overvoltage protection (O.V.P) and
Overcurrent protection (O.C.P) functions. Users can set the parameters of the O.V.P
and O.C.P optionally and enable or disable these functions as required; if one of these
two functions is opened, the instrument will cut off the output once the power output
exceeds the setting value of O.V.P or O.C.P so as to effectively protect the load under
use.
To Next Page
Loading...
