ROBOTIQ HAND-E - 12 Harmonized Standards, Declarations and Certificates; Translation of Original EC Declaration of Incorporation

12. Harmonized Standards, Declarations and Certificates
12.1. Translation of original EC declaration of incorporation
Translation of Original Declaration of Incorporation
In terms of the Directive 2006/42/EC, Annex II, part B of the European Parliament and of the Council on machinery, we, the manufacturer,
Robotiq Inc.
966, Chemin Olivier, suite 500
Lévis, Québec, Canada, G7A 2N1
hereby declares that the following product:
Robotiq Hand-E Gripper
meets the applicable requirements of the Machinery Directive 2006/42/EC of the European Parliament and of the Council. The
incomplete machine may not be operated until the machine in which it is integrated has been declared compliant with the relevant
provisions of the 2006/42/CE Machinery Directive.
The manufacturer agrees to forward upon request of national competent authorities the relevant technical documents specified by
Annex VII, part B, within the required time.
Additionally, the product declares in conformity with the following directives, according to which the product is CE marked:
2011/65/EU Restriction of the use of certain hazardous substances (RoHS)
Person responsible for documentation: Annick Mottard, Jr. Eng., address: see manufacturer address
Lévis, May 2018
Jean-Philippe Jobin
Vice President Research and Development
Robotiq Inc.
The following standards have been applied:
NF EN ISO 12100 2010Safety of machinery — General principles for design — Risk assessment and risk reduction
CEI 60204-1 Ed6.0 2016Safety of machinery — Electrical equipment of machines — Part 1: General requirements
NF EN ISO 14539
2000Manipulating industrial robots — Object handling with grasp-type grippers — Vocabulary
and presentation of characteristics
NF EN ISO 9409-1 2004 2004Manipulating industrial robots — Mechanical interfaces — Part 1: Plates
Robotiq Hand-E Gripper - Instruction Manual
89