Robotiq Hand-E Gripper - Instruction Manual
The user can install fingers directly on the racks, or fasten fingertips to fingertip holders, which are in turn installed on the racks. Refer to
the Installing the Gripper onto the robot section for more information on how to integrate custom fingers and fingertips to Hand-E.
Fig. 1-2: Mounting of a finger on a rack
When ordered as a kit (please refer to the Scope of Delivery section), a fingertip starting kit is included (please refer to the Spare Parts,
Kits and Accessories section). These fingertips should be mounted onto fingertip holders.
Fig. 1-3: Mounting of a fingertip on a fingertip holder (example)
Tip
It is possible to customize your own fingers or fingertips. You can install custom fingers directly on the racks and the
fingertips on the fingertip holders.
9
To Next Page
Loading...
