Roche Diagnostics
Operator’s Manual · Version 3.1 A-95
Cedex Bio System 4Software
Key screens
Orders
f Workplace > Orders
St column Status
Dn column Number of tests done for this order.
# column Total number of tests required for this order.
Print the content of the orders list.
You can choose one of the following options:
o List (All orders in the list with their results. If a filter was applied, the list would
contain only the results that fulfill the filter criterion, and the filter criterion
would be part of the button name.)
o Detail of Order (The currently selected order with its results.)
Change the selected order.
Define a new order.
Delete orders.
You can choose what kind of orders should be deleted:
o List (All orders in the list. If a filter was applied, the list would contain only the
orders that fulfill the filter criterion, and the filter criterion would be part of the
button name.)
o Selected (Delete the selected order with its results.)
Figure A-61 Orders list
A Accepted B All blocked
C Created D Deleted
F All calculated N No test order
O +Order time-out P All pipetted
R Ready S Some blocked
T Rerun time-out U Unknown
blank: Done (all tests measured and results accepted)
STAT orders are marked with an asterisk (*).
To Next Page
Loading...
Need help?
General
