Roche Diagnostics
Operator’s Manual · Version 3.1 A-11
Cedex Bio System 1Safety
Disposal recommendation
Disposal recommendation
All electrical and electronic products should be disposed of separately from the
municipal waste system. Proper disposal of your old appliance prevents potential
negative consequences for the environment and human health.
Disposal label
Disposal of external components
Disposal of the instrument
Malfunction of instrument and incorrect results due to software modifications by
the customer
The Cedex Bio instrument uses open source software. For details see document CedexBio
System License Notes.
The Cedex Bio instrument has been designed to be operated with the unmodified soft-
ware as shipped. The user assumes full responsibility for changing any part of the open
source software, which excludes any liability of Roche Diagnostics Ltd.
This program is distributed without any warranty; without even the implied warranty of
merchantability or fitness for a particular purpose. For details see document CedexBio Sys-
tem License Notes.
The portions of used open source software are part of MIKRAPs CPU-X168LCD/NET board
support package and may be obtained from Mikrap AG (info@mikrap.ch).
Electrical and electronic equipment marked with this symbol are covered by the European
directive on waste electrical and electronic equipment (WEEE) 2002/96/EC.
The symbol denotes that the equipment must not be disposed of in the municipal waste
system.
External components such as the scanner and the ISE power supply, which are marked
with the crossed-out wheeled bin symbol, are covered by the European Directive
2002/96/EC (WEEE).
These items must be disposed of via designated collection facilities appointed by govern-
ment or local authorities.
For more information about disposal of your old products, contact your city office, waste
disposal service or your local service representative.
The instrument must be treated as biologically contaminated hazardous waste. Final dis-
posal must be organized in a way that does not endanger waste handlers. As a rule, such
equipment must be sterile before it is passed on for final disposal.
For more information contact your local service representative.
To Next Page
Loading...
Need help?
General
