Roche Cedex Bio System User Manual

Roche Diagnostics
A-24 Operator’s Manual · Version 3.1
2 Introduction to the instrument Cedex Bio System
Daily operation
Reagent and diluent handling
Reagent disk On the instrument, the reagents are stored on a reagent disk. It provides space for 27
bottles, allowing up to 14 reagent sets to be installed on the disk, assuming that most
tests need two reagents. Extra diluents and cleaners are also loaded on the reagent
disk.
9
Finishing the shift 1. Check for unfinished orders. Workplace > Orders
Choose > Not Finished
2. Check for non-validated results. Workplace > Result Review
Choose > Not Accepted
3. Check for non-transmitted results.
(If working with a host system only.)
Workplace > Result Review
Choose > Not Sent to Host
4. Start the End Shift wizard. Overview > End Shift
5. Perform the daily backup. Utilities > Export > Database
6. Export the full results. Utilities > Export > Results
7. Clean up the database. Workplace > Orders >
Workplace > Result Review>
Workplace > QC Status >
Workplace > QC History >
Workplace > Calibrations >
8. Perform the maintenance actions
that are due.
Utilities > Maintenance
9. Replace cuvettes. Overview >
10. Check the external fluid containers. Overview > >
11. Remove the reagent disk (if last
shift).
Overview > >
12. Log off the system. Overview > button with your user name
13. Shut down the system and switch off
the instrument (if last shift).
n/a n/a
Task Steps Navigation
With wizard As individual steps
Table A-1 Overview of the daily operation tasks (Continued)
A Reagent disk
B Reagent bottle with barcode
C Chimney
Figure A-4 Equipment for reagent handling
A
B C

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English