Roche Cedex Bio System User Manual

Roche Diagnostics
B-52 Operator’s Manual · Version 3.1
5 Daily operation Cedex Bio System
Validating sample results
a To validate sample results of on-board samples
1 On the Overview tab, press the sample button.
A screen is displayed that lists the results of the order that is associated with the
sample.
If TRL Check is activated, the result might be displayed for example as <0.5, and
the <Test Rng flag is added. This means that the measured value is below the
defined TRL value.
2 Select the result, if there is more than one test.
3 Continue with Validating the results on page B-53.
A Status
!: The result has not been accepted yet.
@: The result has not been transmitted yet.
B Test name.
->-: Repeated.
C Results.
D Press to validate the results.
E Press to add more tests to the order.
F Press to delete the order and its results.
Figure B-16
D E F
A B
C

Roche Cedex Bio System Specifications

General

Brand	Roche
Model	Cedex Bio System
Category	Measuring Instruments
Language	English