Roche Diagnostics
B-54 Operator’s Manual · Version 3.1
5 Daily operation Cedex Bio System
Validating sample results
6
Press .
A screen is displayed for selecting your reaction.
7
Do one of the following:
o Press Repeat to re-perform the test using the same dilution.
e
See Repeating tests on page B-55.
o Press Rerun to re-perform the test using a predefined (different) dilution.
e
See Rerunning tests on page B-56.
o Press Accept to accept the result.
e
See Accepting results on page B-57.
o Press Retransmit to send the result to the host again. Use this function if you
suspect that the result has not been stored properly on the host system, for
example because of a communication problem.
To Next Page
Loading...
Need help?
General
