Roche Diagnostics
Operator’s Manual · Version 3.1 A-35
Cedex Bio System 2 Introduction to the instrument
System status
The following system statuses are defined:
Status Comment
Standby The user and host interfaces remain active, as do the reagent
cooling system, fluid system, and the cuvette heating.
Maintenance A maintenance action is being performed. The system is not
available for performing tests.
Diagnostics A system diagnostics action is being performed. The system is
not available for performing tests.
Operating Processing is in progress.
Power Up After switching on, the system performs initialization and
functional test.
Power Down Regular shutdown is in progress.
Stopped Processing has stopped. User intervention is required to allow
the system to resume regular operation.
E-Stopped The system has performed an emergency stop (E. Stop). This
could be due to hardware failure or because any of the safety
devices have requested an emergency stop.
Table A-3 System statuses
To Next Page
Loading...
Need help?
General
