272 Rockwell Automation Publication 750-TG100B-EN-P - June 2019
Chapter 9 Power Bay Components
8. If the top-most receptacle on the back of the LCL filter module contains a
DC capacitor, remove the capacitor. See Remove the LCL Filter Capacitor
Assembly on page 264
. If the top-most receptacle on the back of the LCL
filter module does not contain a DC capacitor, complete steps a and b.
a. Remove the lower two M6 x 16 mm torx screws that secure the cover to
the chassis.
b. Loosen the upper two M6 x 16 mm torx screws that secure the cover to
the chassis and remove the cover.
8
M6 x 16 mm
T30
12.5 N•m (110.6 lb•in)
To Next Page
Loading...
Need help?
General
