10
© Rodenstock GmbH
Status: September 2023
2.7 Special hazards
− Screws of the base plate must not be loosened without authorization.
− During assembly, the mirror column must be secured against tipping/falling over.
− Careless handling, e.g. tilting, may cause the mirror to break, resulting in injury from broken glass.
− The LED of the distance marking is classified in risk group 1 (low risk) according to the IEC 62471
standard. Do not look directly into the burning LED. Risk of retinal injury due to the generation of blue
light, especially in children.
2.8 Customer service with hotline
If you cannot find a solution for an error in the user manual, please contact Rodenstock "Customer Service
Hardware/Software" by e-mail css@rodenstock.com, or to the service hotline: +49 (0) 211-53747782
To Next Page