Basic Instrument Functions
R&S
®
CMW500
100User Manual 1173.9463.02 ─ 02
Fig. 5-11: Setup - Remote
A list of options can also be retrieved using the remote command
SYSTem:BASE:OPTion:LIST?.
A list of options can also be retrieved via remote command, see SYSTem:BASE:
OPTion:LIST on page 254.
5.3.5 Selftests
The R&S CMW500 provides extensive selftest procedures on module and system level.
The selftests are primarily intended for production and service purposes; they are not
needed during normal operation of the instrument. The following description serves as a
general overview.
5.3.5.1 General Test Features
All selftests are arranged in the Setup Dialog.
Setup Dialog
To Next Page
Loading...
