Remote Control
R&S
®
CMW500
189User Manual 1173.9463.02 ─ 02
The ping utility is not password-protected. To initiate a ping at the instrument:
1. Ensure that "ICMP Ping" is enabled (see Advanced Config).
2. Enter the IP address of the second device into the "Destination Address" field (e.g.
10.123.11.22).
3. Click Submit.
6.9.4 SCPI Remote Trace
The remote trace functionality allows to trace input and output strings at the remote con-
trol interface of the R&S CMW500.
A recorded trace (message log) can be evaluated directly in the dialog. Use the high-
lighting and navigation functions provided by the lower toolbar to locate error messages
and messages containing arbitrary search strings. You can also export the message log
to a csv file and evaluate the file using a suitable program.
In order to trace and display messages, switch on "logging" and "live mode" via the tool-
bar.
LXI Configuration
To Next Page
Loading...
